Here are the recommended settings for the LG UB8500 series TV.
Therefore, even despite the factory picture settings, by making small adjustments, you can get a better picture on your TV.
Of course, the settings may vary slightly depending on the type of display or manufacturer.

The backlight can be adjusted from 35 in the dark, to 100 in sunlight during the day.

PICTURE SETTINGS
Picture ModeISF Expert 1
Backlight85
Contrast90
Brightness53
Energy SavingOff
H Sharpnes10
V Sharpness10
Color60
Tint0

EXPERT MODE

Dynamic ContrastOff
Super ResolutionOff
Color Gamut RangeStandard
Edge EnhancerOff
Color FilterOff
White Balance
  • Red -16
  • Green -23
  • Blue -18
Color TempWarm2
PatternOuter
Aspect RatioJust Scan
local dimming Low
Previous articleTV Size to Distance viewing optimum explained
Next articleSetting the TV LG LF6000, LF6090

5 COMMENTS

  1. when you go into expert control then white balance adjustments you
    will see color temp, method, pattern then points, points has a low
    setting for red, green,and blue and a high setting for the same
    colors.the settings you gave for red -16, green -23 and blue -18 are for
    low or high in the points setting?

    please let me know thanks

  2. when you go into expert control then white balance adjustments you will see color temp, method, pattern then points, points has a low setting for red, green,and blue and a high setting for the same colors.the settings you gave for red -16, green -23 and blue -18 are for low or high in the points setting?

    please let me know thanks

  3. I have a question on the settings for the lg ub 8500.

    the white balance settings for red -16, green -23 and blue -18 is that for the high or low setting or both, please answer thank you

    • i don’t understand what you mean. The white balance depends on brightness, this settings is for brightness 53.

      • hi again,

        when setting the white balance at red -16, green -23, and blue -18 are these numbers for both the points hi and points low settings or which points setting did you use ?

LEAVE A REPLY

Please enter your comment!
Please enter your name here