The sound settings are one of the essential things you should do as best you can to enjoy watching TV.
There are two settings in the sound settings: PCM and Bitstream; when you set up the TV, you have to choose the right setting. PCM is the default setting out of the box; this is a universal setting and will work in all situations.

HDMI Audio Input format

What is PCM audio on TV Samsung

PCM is short for pulse code modulation. It does not apply to modern TVs because PCM in audio was originally used to refer to the conversion of analog sound to digital. The acronym was widely used in telephony in the mid-20th century, and in the ’70s and ’80s, when digital audio processors appeared, it came to be used in televisions as well.

In today’s TVs, the PCM setting means the following: the digital audio signal will be processed by the TV’s audio processor. The audio signal will be converted to 2.0 or 2.1 formats (two speakers and a subwoofer). The audio will then be sent to the TV’s speakers or audio outputs. If this setting is selected, even multi-channel Dolby audio will be converted to a lower-level format.

Thus, PCM is a universal setting suitable for all cases. The TV usually has two speakers; the headphones also have two speakers. Moreover, almost any external speaker (except top-of-the-line ones) has two speakers. However, this setting will not work if you have high-end speakers because the sound quality will be worse than possible.

What is Bitstream audio on Samsung TV explained

Bitstream – streaming audio. This format is more advanced and is designed for high-end audio. When you select the Bitstream setting, the audio stream is not processed by the audio processor of the TV; the sound passes through the TV and goes to the audio outputs (passes in transit). In this case, the external speaker processor assumes the digital audio is processed.

This setting applies if you have a soundbar or an external 5.1 or 7.1 speaker system.

Which setting should I choose: PCM or Bitstream?

It all depends on what device you are using to listen to audio. If you are using a high-end device for audio playback with an audio processor, you should use Bitstream for maximum audio quality. However, suppose you are using built-in speakers or a low-quality audio device. In that case, it is better to use PCM because Bitstream will degrade the sound quality (because the audio device will not process the sound).

Previous articleWhat is Roku TV?
Next articleSamsung TV Q60BD vs Q60BA what is the difference explained

3 COMMENTS

  1. How do I keep the sound setting on bitstream rather than pcm. Tv wants to default to pcm. Can you change the default?

    • On some TV models, bitstream will only work if the audio output to external high-end audio devices is activated. You must activate the ARC audio output (eARC) or the optical audio output. If this mode is set, the TV speakers will be muted.

  2. “However, if you are using built-in speakers or a low-end audio peripheral, it is better to use PCM, because Bitstream will degrade the video quality (because the audio peripheral does not have an audio processor to process the sound).”

    Please explain why bitstream will degrade video quality.
    Also, degradation of video quality cannot be explained by a lack of audio processing in the peripheral.

    I think things got confused here.

    bitstream vs PCM is above all a question of what audio format is supported by the audio decoding (whether decoding in done in TV or in external audio decoder)
    we typically use PCM when the audio is DTSxxx which is poorly supported by TV and soundbar.

Leave a Reply to Jeri Cancel reply

Please enter your comment!
Please enter your name here